Temperature and Ozone Unit

Customer: Lastly, we have found the temperature wire but unsure what temperature it takes and where it’s supposed to go as not sure if it should go inside the bath area - but the wire isn’t long enough to reach and also where does it feed into the bath cabin if that’s where it goes?

The temperature probe will push through from behind the column into this location, as shown below.

The white ozone is supplied separately and will need to be fitted. Unscrew the chrome end from the main body of the ozone, position the ozone unit on the outside of the shower on the roof as shown opposite. Screw on the chrome end on the inside of the shower, to hold it in place. The Ozone will be located over the hole in the roof towards the back corner: